Metallized paper Metalino Self-adhesive 83

Metallized paper structure:
  • trappinglacquer coating
  • metallized layer
  • intermediate lacquer layer
  • paper-basis 80 g/m2
  • additional moisturizing layer

Table of technical characteristics
Indicators name Unit of measurement Value Permitted deviation
Product mass of the area 1m2 g/m2 83 ±4%
Thickness micron 135 ± 2%
Gloss (60) % 500 ± 50
Percent elongation % 3
Viscidity N/cm 7
Application temperature °С from +3 to +50 ± 5
Operation temperature °С from -40 to +70 ± 5
Application recommendations:
For better adhesion with the surface it is recommended to clean the surface from dirt and moisture. For better contact it is necessary to press the film to the surface.

Application:
the label for the foodstuffs, flexible container, glass, metal,various plastics (except PVC)

Printing mode:
offset, deep rotation, flexography

Additional information:
  • external metallized side
  • max width of the roll: 1050 mm (non-cut)
  • internal diameter of the roll: 76 mm
  • maximum external diameter: 350 mm
  • maximum deviation by length ± 5 %
  • maximum deviation by width ± 1 mm

See also in the section Metalino “Likk”
If you have questions, you can address our managers